Hot Cell® Sensors for Liquids, Gels, and Pastes
Testing Cp of liquids, gels, and pastes up to 180°C
This Hot Cell® sensor has a small cell volume and is intended for testing liquids, gels, and pastes. The cell is made of 18K gold and has the shape of a flat cylinder, with a width of 19 mm and height of 4.5 mm. The gold enables easy cleaning and handling of acidic or corrosive specimens.
This Hot Cell® sensor comes with a high temperature foam insulation and two cable options – a standard grey-colored polymer-clad cable for use between -20°C to 50°C, and a red-colored silicone-clad cable for use between -60°C to 180°C. For the latter option, grey-colored adaptor cable is needed for connection to Hot Disk® instruments (or our sensor switch units) and is offered separately.
- Option 1: Polymer cable cladding (-20°C to 50°C)
- Option 2: Silicone cable cladding (-60°C to 180°C)
Hot Cell® Sensor – Model AU-D19-H4 (Gold cell, diameter 19 mm, height 4 mm)
| Cell | |
|---|---|
| Material | Gold, 18K |
| Shape | Cylinder, flat |
| Volume | 1.3 cm3 |
| Diameter | 19 mm |
| Height | 4.5 mm |
| Insulation | High temperature foam |
| Maximum sample size | |
| Volume | 1.1 ml |
| Diameter | 19 mm |
| Height | 4.0 mm |
| Cable | |
| Cladding | Polymer (option 1) or silicone (option 2) |
| Housing material | Plastic (option 1) or aluminum (option 2) |
| Length | 2.0 m (option 1) or 1.0 m (option 2) |
| Connector | 8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2) |
| Temperature range | -20°C to 50°C (option 1) or -60°C to 180°C (option 2) |