Hot Cell®Sensors for Bulks, Granules, Powders and Small Batteries
Testing Cp of button cells medium-size pouch cells
These three Hot Cell® sensors have a small to medium cell volume and are intended for testing bulks, granules, and powders. They are also ideal for testing small batteries, such as button cells and small-size pouch cells. The cells are made of aluminium and have the shape of a flat cylinder. The three cell sizes have a width and height of 20 mm and 5 mm, 40 mm and 9 mm, and 70 mm and 12 mm, respectively.
The Hot Cell® sensors come with high-temperature foam insulation and two cable options – a standard grey-colored polymer-clad cable for use between -20°C to 50°C, or a red-colored silicone-clad cable for use between -60°C to 180°C. For the latter option, grey-colored adaptor cable is needed for connection to Hot Disk® instruments (or sensor switch units) and is offered separately.
- Option 1: Polymer cable cladding (-20°C to 50°C)
- Option 2: Silicone cable cladding (-60°C to 180°C)
Hot Cell® Sensor – Model AL-D20-H5 (Aluminum cell, diameter 20 mm, height 5 mm)
| Cell | |
|---|---|
| Material | Aluminum |
| Shape | Cylinder, flat |
| Volume | 1.6 cm3 |
| Diameter | 20 mm |
| Height | 5 mm |
| Insulation | High temperature foam |
| Maximum sample size | |
| Volume | 1.4 ml |
| Diameter | 20 mm |
| Height | 4.5 mm |
| Cable | |
| Cladding | Polymer (option 1) or silicone (option 2) |
| Housing material | Plastic (option 1) or aluminum (option 2) |
| Length | 2.0 m (option 1) or 1.0 m (option 2) |
| Connector | 8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2) |
| Temperature range | -20°C to 50°C (option 1) or -60°C to 180°C (option 2) |
Hot Cell® Sensor – Model AL-D40-H9 (Aluminum cell, diameter 40 mm, height 9 mm)
| Cell | |
|---|---|
| Material | Aluminum |
| Shape | Cylinder, flat |
| Volume | 11.3 cm3 |
| Diameter | 40 mm |
| Height | 8.5 mm |
| Insulation | High temperature foam |
| Maximum sample size | |
| Volume | 10.7 ml |
| Diameter | 40 mm |
| Height | 8.5 mm |
| Cable | |
| Cladding | Polymer (option 1) or silicone (option 2) |
| Housing material | Plastic (option 1) or aluminum (option 2) |
| Length | 2.0 m (option 1) or 1.0 m (option 2) |
| Connector | 8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2) |
| Temperature range | -20°C to 50°C (option 1) or -60°C to 180°C (option 2) |
Hot Cell® Sensor – Model AL-D70-H12 (Aluminum cell, diameter 70 mm, height 12 mm)
| Cell | |
|---|---|
| Material | Aluminum |
| Shape | Cylinder, flat |
| Volume | 46.2 cm3 |
| Diameter | 70 mm |
| Height | 12 mm |
| Insulation | High temperature foam |
| Maximum sample size | |
| Volume | 44.3 ml |
| Diameter | 70 mm |
| Height | 11.5 mm |
| Cable | |
| Cladding | Polymer (option 1) or silicone (option 2) |
| Housing material | Plastic (option 1) or aluminum (option 2) |
| Length | 2.0 m (option 1) or 1.0 m (option 2) |
| Connector | 8-pin Lemo (male) (option 1) or 4-pin Lemo (male) (option 2) |
| Temperature range | -20°C to 50°C (option 1) or -60°C to 180°C (option 2) |