Hot Disk TPS 500
The Hot Disk TPS 500 is an advanced instrument designed to swiftly and accurately measure Thermal Conductivity, Thermal Diffusivity, Thermal Effusivity, and Specific Heat Capacity in a diverse array of materials. It serves as an excellent thermal conductivity meter, well-suited for quality control testing. The Hot Disk TPS 500 can accommodate bulk samples with a thickness of just a few millimeters and offers a Thermal Conductivity range from 0.03 to 100 W/m/K, along with a temperature range of -100°C to 200°C.
Ideal thermal conductivity meter for the economical laboratory or QC testing set-up. The TPS 500 measures the Thermal Transport Properties of solids, powders, pastes, gels and liquids
Simplicity: Latest user friendly, yet sophisticated, test and analysis software simplifies testing, making the learning curve very short. Also, normally no sample preparation is necessary. This makes the TPS 500 a smart, simple-to-use tool, easy to integrate.
Rapidity: The TPS 500 will test most materials in less than 20 seconds. For multiple measurements on the same sample, a cooling time between tests is recommended.
Sensors: The TPS 500 includes two specially selected Hot Disk® sensors suitable for the specified range of materials and applications, with a respective radius of 3.2 mm and 6.4 mm.
Temperature Control: Using our test and analysis software, automatic series of measurements at different ambient temperatures (isothermal steps) are easy to perform using our optional Bath Circulator and Convection Oven accessories.
Everything to get you started: The basic TPS 500 configuration includes everything to get you started making measurements. The instrumentation includes the Isotropic and Single-Sided Testing Modules, two Hot Disk® sensors, a Stainless Steel verification sample for data verification, a single-sided background insulation for single-sided testing, and a room temperature sample holder.
Optional Measurement Modules: In addition to the included Isotropic and Single-Sided Testing Modules, the optional Automation Module is available for remote control of the TPS 500 instrument.
Further Discussions: The proper identification of an ideal system and accessory combination depends on the samples to be measured and the desired information from these samples. Please contact us to discuss your sampling needs.