Installation Highlights

We are glad to share the news about the implementation of Barnett Technical Services installation of a significant engineering project.

The company has received the request and later an order from the Chevron energy corporation’s research center to develop an IR Fourier Spectrometer for controlling the chemical reaction in the on-line process.

The Barnet Technical Services Team along with Ostec engineers have implemented developing the industrial version on the basis of the standard air based FTIR spectrometer IROS 05. To transform the research device into an industrial unit it was necessary to develop a sealed device case filled with dry nitrogen under extra pressure, to select and replace a typical IR detector with an MCT detector with Peltier cooling, to develop a cooling system and temperature stabilization for ensure the lowest possible noise level inside the device, as well as specialized software for obtaining data and its subsequent processing.

MobileGuard Gas Detection

Teco Peoples Gas hits the road in one of their new methane detection vehicles. These vehicles are going to be game changers for Peoples Gas. The Ford Escapes are outfitted with MobileGuard, a cutting-edge, laser-based analyzer that uses special software and windspeed calculations to pinpoint natural gas leaks by locating methane emissions. The sensitive sensors can detect with ultra-high precision – parts per billion, as compared with our handheld leak detection equipment which detects parts per million. That means they will detect methane emissions that you can’t smell and would otherwise go unnoticed. And, the system is smart enough to know if the methane detected is from natural gas or other sources like biogas from sewers.

Click here to view the whole story

Microplastics Isolation and Characterization

Microplastics contaminate marine, freshwater and terrestrial ecosystems around the world. The growing prevalence of these contaminants requires study on their impact on human health and ways in which they can be identified and remediated.

Barnett Technical Services (BTS) has participated in a study set up by the State of California to assess methods for counting and characterizing micro plastic particles in water. This summary illustrates some of the methods BTS used in this study.

Click here to read the entire article.

AIC FAIC ANNUAL MEETING

Catch us live at the 2021 virtual show.

LIST OF SESSIONS

View Our Exhibitor Showcase Track B
May 17 @ 10:45 AM (PDT)
Learn about the Micromanipulator and our other tools.

Visit our Exhibitor Experience
May 27 @ 1:30 – 1:40 pm (EST)
Research & Technical Studies and SPNHC Joint Session (Starts at Noon).

What we offer the Conservation Community

The Micro Support Axis Pro micromanipulator allows for sampling of very small fragments (often smaller than can be seen with the naked eye).  This is often done for measurement by FT-IR, Raman, or another analytical technique.

An example of how the Axis Pro can be used to isolate small fragments for sampling may be seen here: https://barnett-technical.com/….

The Ostec XROS MF30 X-ray microscope can be used to perform nondestructive elemental analysis using XRF.  More information on this system may be found here: https://barnett-technical.com/….

A range of sampling solutions for a wide variety of material and chemical analysis situations may be found on our Steve’s Solutions page.

Watch AIC 2021 presentation

Advanced Technisales

Advanced Technisales is now a representative of Barnett Technical Services for Ostec and Micro Support products in the Eastern United States. Founded in 2009 Advanced Technisales specializes in selling process optimization and control equipment for R&D, pilot plant and plant. At present we sell in-situ MIR, NIR, Raman, THz-Raman and Particle Size Analysis. We also sell Calorimeters, Automated Lab Reactors and process enhancement software.

AIC FAIC 2021 Annual Meeting

We are very excited to be attending the AIC FAIC Annual Meeting virtually next summer May 10 – June 24, 2021. We will be exhibiting our Micromanipulator as well as our Viewing systems for art restoration.

Catch us live at the 2021 virtual show.

LIST OF SESSIONS

View Our Exhibitor Showcase Track B
May 17 @ 10:45 AM (PDT)
Learn about the Micromanipulator and our other tools.

Visit our Exhibitor Experience
May 27 @ 1:30 – 1:40 pm (EST)
Research & Technical Studies and SPNHC Joint Session (Starts at Noon).

What we offer the Conservation Community

The Micro Support Axis Pro micromanipulator allows for sampling of very small fragments (often smaller than can be seen with the naked eye).  This is often done for measurement by FT-IR, Raman, or another analytical technique.

An example of how the Axis Pro can be used to isolate small fragments for sampling may be seen here: https://barnett-technical.com/….

The Ostec XROS MF30 X-ray microscope can be used to perform nondestructive elemental analysis using XRF.  More information on this system may be found here: https://barnett-technical.com/….

A range of sampling solutions for a wide variety of material and chemical analysis situations may be found on our Steve’s Solutions page.

Watch AIC 2021 presentation

Micro Support Micromanipulators

Axis Pro Micromanipulator

Manipulation of small materials.Probes available for a wide range of sample manipulations, including:

  • Isolating particles
  • Cutting
  • Milling off a surface
  • Nanoliquid deposition
  • Vacuum for material removal

Micro Support

Viewing Systems for Restoration

For more information on viewing systems contact us below.

Steve’s Solutions Featuring Micro Support

For More information

Micro Support page
Micro Support Manufacturers Website

Contact Us Online Form
Phone: 916-897-2441
Email: info@Barnett-Technical.com

SemiCon West 2021

We are very excited to be attending SemiCon West in San Francisco, CA December 7-9 2021. Please visit us at booth #1947 to see the following technologies.

Micro Support Micromanipulators

Axis Pro Micromanipulator

Manipulation of small materials.Probes available for a wide range of sample manipulations, including:

  • Isolating particles
  • Cutting
  • Milling off a surface
  • Nanoliquid deposition
  • Vacuum for material removal

Arms also be added to FTIR or Raman Microscopes.

Nanoro Super-Resolution Microscopes

Bench top microscope with imaging capabilities down to 50 microns! Provides color imaging without the need for vacuum or other special sample handling. For more information on this microscope, click here:  https://barnett-technical.com/nanoro/

About SEMICON West

Three days of presentations with more than 80+ hours of technical and business programming, plus hundreds of exhibitors provide the insights, innovations, and intelligence you need to get ahead and embrace today’s disruptive landscape.

Visit the SEMICON West  site